CONCRETE ADMIXTURES

1.     Water Reducers & Plasticizers:

Full range of water reduction technologies from water reducer (Sika Plastiment or Sika Plastocrete) to high range water reducer (Sikament or Sika ViscoCrete) combined with controlled setting times and all application requirements.

1.1  PLASTIMENT® VZ

Plastiment VZ is a purpose designed material which is a chemical combination Polycarboxylic material.

USE

1.       Ready-mix concrete
2.       Precast concrete
3.       Pumped concrete
4.       Lightweight concrete
5.       Wet shot Crete
6.      Semi-dry concrete

CHARACTERISTICS AND ADVANTAGES

1.            Improved workability/reduces w/c ratio
2.             Flexible degree of retardation
3.             High resistance to segregation/reduces bleeding
4.             Improved surface finish
5.             Reduces shrinkage cracking potential
6.              Higher initial and ultimate compressive strengths
7.              Higher durability concrete

1.2  PLASTIMENT®-100

Plastiment-100 is a versatile and economical concrete plasticizer with a wide dosage range suitable for various applications.

Plastiment-100 is particularly suitable for use in tropical and hot climatic conditions.

USE

1.  Its plasticizing effect is particularly useful where:
2.   Exposed surfaces are important
3.    Maximum performance is desired
4.    Placing conditions are difficult
5.   Pre-cast elements are produced

CHARACTERISTICS AND ADVANTAGES

1.  Improved workability without increased water
2.   Reduced water without loss of workability
3.   Increased strengths
4.   Improved surface finish
5.   Unaffected setting times
6.   Reduced shrinkage and creep

1.3  PLASTIMENT®-120

Plastiment 120 is a versatile and economical concrete plasticizer with a wide dosage range. Plastiment 120 is especially designed for use in tropical and hot climatic conditions.

USE

 Its plasticizing effect is particularly useful where:

1.   Exposed surfaces are important
2.   Maximum performance is desired
3.   Placing conditions are difficult
4.   Pre-cast elements are produced

CHARACTERISTICS AND ADVANTAGES

Plastiment 120 provides the following properties:

1.  Improved workability without increased water
2.   Reduced water without loss of workability
3.   Increased strengths
4.   Improved surface finish
5.   Unaffected setting times
6.   Reduced shrinkage and creep

1.4  PLASTIMENT® PR-450

High Performance Plasticizing and Slump Retaining Concrete Admixture

USE

Its plasticizing effect is particularly useful where:

1.   Exposed surfaces are important
2.   Maximum performance is desired
3.   Pre-cast elements are produced

CHARACTERISTICS AND ADVANTAGES

Plastiment-PR 450 provides the following properties:

1.   Improved workability without increased water
2.   Reduced water without loss of workability
3.   Increased strengths
4.   Improved surface finish
5.   Reduced shrinkage and creep
6.   Suitable for use in tropical and hot climatic conditions.

1.5  PLASTIMENT® AR-340 SA

Plastiment-AR 340 SA is used as a powerful concrete plasticizer admixture for dry and semi dry concrete production

USE

Plastiment- AR 340 SA is used for producing high quality concrete in applications such as:

1.   Hollow core concrete slabs
2.   Concrete pipes
3.   Paving tiles
4.   Dry and semi dry concrete production

CHARACTERISTICS AND ADVANTAGES

1.   Reduced water up to 15%
2.   Improved cohesion of the concrete
3.   Enhance compaction
4.   Smooth, even, and neat surface finish
5.   Increased strengths
6.   Reduced shrinkage and creep
7.   Economical

1.6    PLASTIMENT® PR-350

Plastiment-PR 350 is used as a concrete plasticizer-retarder where high quality concrete is required in difficult climatic conditions. Suitable for use in tropical and hot climatic conditions.

USE

Plastiment-PR 350 is used for producing high quality concrete in applications such as:

1.   Ready mixed concrete
2.   Fair faced concrete
3.   High temperature concreting
4.   Difficult placing conditions
5.   Long transport distances

CHARACTERISTICS AND ADVANTAGES

1.   Long lasting slump at high concrete temperature
2.   Increased setting time in hot weather
3.   Reduced water without loss of workability
4.   Increased strengths
5.   Reduced shrinkage and creep
6.   Better surface finish
7.   Economical

1.7   SIKAMENT®-520 BA

Sikament-520 BA is used as a highly effective water-reducing agent and superplasticizer for the production of high quality, free flowing concrete in hot climates. The dual action of Sikament-520 BA promotes accelerated hardening with high early and ultimate strengths.

USE

Sikament-520 BA is used wherever high quality concrete is demanded under difficult placing and climatic conditions.

CHARACTERISTICS AND ADVANTAGES

1.   Substantial improvement in workability without increased water or the risk of segregation.
2.   Long-lasting control of slump loss.
3.   No adverse effect on ultimate strengths.
4.   As a Water Reducer
5.   Early strengths significantly increased.
6.   High ultimate strengths.
7.   Up to 20% water reduction.
8.   Especially suitable for hot climates.

No excessive air-entrainment. - No adverse shrinkage effect. - Improved surface finish. - Increased water tightness.

1.8   SIKAMENT®-320 BA*

Sikament® 320 BA is a highly effective dual action liquid superplasticizer for the production of free flowing concrete and substantial water-reducing agent for promoting high strengths. It imparts excellent slump retention for prolonged periods.

USE

Sikament 320 BA is used as a superplasticizer in the production of free flowing concrete, such as

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Textured surface finishes

CHARACTERISTICS AND ADVANTAGES

1.   High durable concrete
2.   Substantial improvement in workability without water increase
3.   High flow-ability without the risk of segregation
4.   Long-lasting control of slump loss.
5.   No adverse effect on ultimate strengths.
6.   Improve concrete durability
7.   Maintain reduction of pump pressure in large volume concrete pours
8.   Enhance the properties of high strength concrete

1.9   SIKAMENT® 920 BA*

Sikament 920 BA is a highly effective dual action liquid super-plastiziser for the production of free flowing concrete and substantial water-reducing agent for promoting high strengths. It imparts excellent slump retention for prolonged periods.

USE

Sikament 920 BA is used as a super-plasticizer in the production of free flowing concrete, such as

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Textured surface finishes

CHARACTERISTICS AND ADVANTAGES

1.   High durable concrete
2.   Substantial improvement in workability without water increase
3.   High flow-ability without the risk of segregation
4.   Long-lasting control of slump loss.
5.   No adverse effect on ultimate strengths.
6.   Improve concrete durability
7.   Maintain reduction of pump pressure in large volume concrete pours
8.   Enhance the properties of high strength concrete
9.   Improve surface finish.

1.10          SIKAMENT® NN-S

Sikament-NNS is a highly effective dual action liquid superplasticizer for the production of free flowing concrete or as a substantial water-reducing agent for promoting high early strengths. It imparts excellent slump retention for prolonged periods.

This product is suitable for tropical and hot climatic conditions.

USE

Sikament-NNS is used as a superplasticizer in the production of free flowing concrete such as:

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Piles
5.   It is also used as a water-reducing agent leading to high strength concrete such as:
6.   Pre-cast concrete elements
7.   Pre-stressed concrete
8.   Bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

1.  Improved workability without increased water
2.   Concrete is placed easily, especially suitable for slender components with densely packed reinforcement
3.   Improved cohesion of the concrete mix significantly reduces the risk of segregation and allows greater time for placement
4.   Increased strengths
5.   Improved surface finish
6.   Reduced shrinkage and creep
7.   This product is suitable for tropical and hot climatic conditions
8.   As a Water Reducer:
9.   Up to 25% water reduction.
10.   Final strength improved up to 40%.

1.11          SIKAMENT® HRM

it is used as a highly effective water-reducing agent and superplasticizer for the production of high quality, free flowing concrete in hot climate.

USE

It’s used wherever high quality concrete is demanded under difficult placing and climatic conditions.

CHARACTERISTICS AND ADVANTAGES

1.   Substantial improvement in workability without increased water or the risk of segregation.
2.   Long-lasting control of slump loss.
3.   No adverse effect on ultimate strength.

2       Mid-Range Water Reducers & Super Plasticizer

Incorporated at the mixing stage of concrete, they represent 0.3 to 0.5% of the cement’s weight. They improve the rheology of fresh concrete and offer superior workability.

2.1  SIKAMENT® NN

Sikament-NN is a highly effective dual action liquid superplasticizer for production of free flowing concrete or as a substantial water-reducing agent for promoting high early and ultimate strengths. Suitable for use in tropical and hot climatic conditions.

USE

Sikament-NN is used as a superplasticizer in the production of free flowing concrete, such as:

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Textured surface finishes

Sikament-NN is also used as a water-reducing agent for producing high early strength concrete, such as:

1.   Pre-cast concrete elements
2.   Pre-stressed concrete
3.   Bridges and cantilever structures
4.   Concrete where formwork must be removed quickly or early loading can be applied

CHARACTERISTICS AND ADVANTAGES

1.   Workability is greatly improved.
2.   Increased place ability in slender components with densely packed reinforcement.
3.   Easy placing, less vibrating.
4.   Normal set without retardation.
5.   Significantly reduces the risk of segregation.
6.   As a Water Reducer:
7.   Up to 25% water reduction.
8.   16 hours compressive strengths increased by up to 100%.
9.   Final strengths are improved by up to 40%.

2.2   SIKAMENT® NN-S

Sikament-NNS is a highly effective dual action liquid superplasticizer for the production of free flowing concrete or as a substantial water-reducing agent for promoting high early strengths. It imparts excellent slump retention for prolonged periods.

This product is suitable for tropical and hot climatic conditions.

USE

Sikament-NNS is used as a superplasticizer in the production of free flowing concrete such as:

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Piles
5.   It is also used as a water-reducing agent leading to high strength concrete such as:
6.   Pre-cast concrete elements
7.   Pre-stressed concrete
8.   Bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

1.   Improved workability without increased water
2.   Concrete is placed easily, especially suitable for slender components with densely packed reinforcement
3.   Improved cohesion of the concrete mix significantly reduces the risk of segregation and allows greater time for placement
4.   Increased strengths
5.   Improved surface finish
6.   Reduced shrinkage and creep
7.   This product is suitable for tropical and hot climatic conditions
8.   As a Water Reducer:
9.   Up to 25% water reduction.
10.   Final strength improved up to 40%.

2.3   SIKAMENT®-R4QV (W)

Sikament-R4QV (W) is a highly effective dual action liquid superplasticiser for the production of free flowing concrete or as a substantial water-reducing agent for promoting high strengths. It imparts excellent slump retention for prolonged periods.

USE

Sikament-R4QV (W) is used as a superplasticizer in the production of free flowing concrete such as in;

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Piles

It is also used as a water-reducing agent for production of high early strength concrete such as in;

1.   Pre-cast concrete elements
2.   Pre-stressed concrete
3.   Bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

1.   Sikament-R4QV (W) provides the following properties:
2.   As a Super-plasticizer:
3.   Workability is greatly improved.
4.   Concrete is placed easily, especially
5.   Suitable in slender components with densely packed reinforcement.
6.   Concrete requires less vibrating.
7.   Reduces significantly the risk of segregation and allows greater time for placement.

2.4   SIKAMENT®-620

Sikament-620 is a highly effective dual action liquid superplasticizer for the production of free flowing concrete or as a substantial water-reducing agent for promoting high early strengths. It imparts excellent slump retention for prolonged periods.

USE

Sikament-620 is used as a superplasticizer in the production of free flowing concrete such as in;

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Piles

It is also used as a water-reducing agent leading to high early strength concrete such as in,

1.   Pre-cast concrete elements
2.   Pre-stressed concrete
3.   Bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

Sikament-620 provides the following properties:

1.   Workability is greatly improved.
2.   Concrete is placed easily,
3.   Especially suitable for slender components with densely packed reinforcement.
4.   Concrete requires less vibrating.
5.   Improved cohesion of the concrete mix significantly reduces the risk of segregation and allows greater time for placement.

2.5   SIKAMENT®-R4QV (D)

Sikament-R4QV (D) is a highly effective dual action liquid superplasticizer for the production of free flowing concrete or as a substantial water-reducing agent for promoting high strengths. It imparts excellent slump retention for prolonged periods. The product is suitable for use in tropical and hot climatic conditions.

USE

Sikament-R4QV (D) is used as a superplasticizer in the production of free flowing concrete such as:

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Piles

CHARACTERISTICS AND ADVANTAGES

1.   Workability is greatly improved
2.   Concrete is placed easily, especially suitable in slender components with densely
3.   Packed reinforcement
4.   Concrete requires less vibrating
5.   Improved cohesion of the concrete mix reduces significantly the risk segregation and allows greater time for placement

2.6   SIKAMENT® HRG

High range water reducing and slump retaining concrete admixture

USE

As a superplasticizer in the production of free flowing concrete such as:

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Textured surface finishes

CHARACTERISTICS AND ADVANTAGES

1.   High durable concrete
2.   Substantial improvement in workability without water increase
3.   High flow ability without the risk of segregation
4.   Long lasting control of slump loss
5.   Improve concrete durability
6.   Enhance the properties of high strength concrete
7.   No adverse effect on ultimate strength

2.7   SIKAMENT®-R4QV

Sikament-R4QV is a highly effective dual action liquid superplasticizer for the production of free flowing concrete or as a substantial water-reducing agent for promoting high strengths. It imparts excellent slump retention for prolonged periods.

USE

Sikament-R4QV is used as a superplasticizer in the production of free flowing concrete such as in

1.   Slabs and foundations
2.   Walls, columns and piers
3.   Slender components with densely packed reinforcement
4.   Piles

CHARACTERISTICS AND ADVANTAGES

1.   Workability is greatly improved.
2.   Concrete is placed easily, especially suitable in slender components with densely packed reinforcement.
3.   Concrete requires less vibrating.
4.   Improved cohesion of the concrete mix reduces significantly the risk of segregation and allows greater time for placement.

2.8   SIKAMENT® HRM

it is used as a highly effective water-reducing agent and superplasticizer for the production of high quality, free flowing concrete in hot climate.

USE

Its used wherever high quality concrete is demanded under difficult placing and climatic conditions.

CHARACTERISTICS AND ADVANTAGES

1.   Substantial improvement in workability without increased water or the risk of segregation
2.   Long-lasting control of slump loss
3.   No adverse effect on ultimate strength

2.9   PLASTIMENT® AR-340 SA

Plastiment-AR 340 SA is used as a powerful concrete plasticizer admixture for dry and semi dry concrete production

USE

Plastiment- AR 340 SA is used for producing high quality concrete in applications such as:

1.   hollow core concrete slabs
2.   Concrete pipes
3.   Paving tiles
4.   Dry and semi dry concrete production

CHARACTERISTICS AND ADVANTAGES

1.   Reduced water up to 15%
2.   Improved cohesion of the concrete
3.   Enhance compaction
4.   Smooth, even, and neat surface finish
5.   Increased strengths
6.   Reduced shrinkage and creep
7.   Economical

2.10          SIKAPLAST®-1300

Sikaplast 1300 VP is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with extended slump retention in hot climates. Sikaplast1300 VP is especially suitable for use in concrete mixes containing Micro silica and other Pozzolanic materials like GGBS & Fly Ash. This product is especially suitable for tropical and hot climatic conditions.

USE

SikaPlast 1300 VP is used for the following types of concrete:

1.   High flow concrete
2.   Concrete with high water reduction
3.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

SikaPlast 1300 VP provides the following beneficial properties:

1.   Substantial improvement in workability without increased water
2.   No risk of segregation
3.   Normal set without retardation ( within the dosage limit )
4.   Improved density and surface finish
5.   Improved water tightness
6.   Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.
7.   SikaPlast 1300 VP gives the concrete extended workability, flow and depending on the mix design, dosage and quality of material used, slump/flow can be maintained up to 4 hours even at high ambient temperature.

2.11          SIKAPLAST®-1400

SikaPlast-1400 is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with extended slump retention in hot climates. SikaPlast-1400 is especially suitable for use in concrete mixes containing micro-silica and other pozzolanic materials like GGBS & Fly Ash.

USE

SikaPlast-1400 is used for the following types of concrete:

1.   High flow concrete
2.   Concrete with high water reduction
3.   High strength concrete Including slabs, foundations, walls, columns and piers, piles, pre-stressed concrete, bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

SikaPlast-1400 provides the following beneficial properties :

1.   Substantial improvement in workability without increased water
2.   No risk of segregation
3.   Normal set without retardation ( within the dosage limit )
4.   Improved density and surface finish
5.   Improved water tightness
6.   Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.

2.12          SIKAPLAST®-1400

SikaPlast-1400 is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with extended slump retention in hot climates. SikaPlast-1400 is especially suitable for use in concrete mixes containing micro-silica and other pozzolanic materials like GGBS & Fly Ash.

USE

SikaPlast-1400 is used for the following types of concrete:

1.   High flow concrete
2.   Concrete with high water reduction
3.   High strength concrete Including slabs, foundations, walls, columns and piers, piles, pre-stressed concrete, bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

SikaPlast-1400 provides the following beneficial properties:

1.   Substantial improvement in workability without increased water
2.   No risk of segregation
3.   Normal set without retardation ( within the dosage limit )
4.   Improved density and surface finish
5.   Improved water tightness
6.   Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.

2.13          SIKAPLAST®-1350

SikaPlast-1350 is a third generation super-plasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with extended slump retention in hot climates.

USE

SikaPlast-1350 is used for the following types of concrete:

1.   High flow concrete
2.   Concrete with high water reduction
3.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

SikaPlast-1350 provides the following beneficial properties :

1.   Substantial improvement in workability without increased water
2.   No risk of segregation
3.   Normal set without retardation ( within the dosage limit )
4.   Improved density and surface finish
5.   Improved water tightness
6.   Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.

2.14          SIKAPLAST®-400

SikaPlast-400 is a third generation superplasticizer for concrete and mortar.It is particularly developed for the production of high flow concrete with extended slump retention in hot climates.

USE

SikaPlast-400 is used for the following types of concrete:

1.   Medium flow concrete
2.   Concrete with high water reduction
3.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

1.   Substantial improvement in workability without increased water
2.   No risk of segregation
3.   Normal set without retardation ( within the dosage limit )
4.   Improved density and surface finish
5.   Improved water tightness
6.   Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.

2.15          SIKAPLAST® 1500

SikaPlast 1500 is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with extended slump retention in hot climates.

USE

SikaPlast 1500 is used for the following types of concrete:

1.   High flow concrete
2.   Concrete with high water reduction
3.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

SikaPlast 1500 provides the following beneficial properties :

1.   Substantial improvement in workability without increased water
2.   No risk of segregation
3.   Normal set without retardation ( within the dosage limit )
4.   Improved density and surface finish
5.   Improved water tightness
6.   Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.

2.16          SIKAPLAST®-800

It is a highly effective, mid-range, new generation concrete admixture for production of high workability concrete or as a substantial water reducing

USE

Its use for producing high quality concrete in production of:

1.   Slabs and foundation
2.   walls and piers
3.   Beams and columns

CHARACTERISTICS AND ADVANTAGES

1.   Packed reinforcement
2.   Less vibration and thus reduce segregation
3.   Better surface finish
4.   Increase strength
5.   Reduced shrinkage and creep
6.   Good water reduction possible

2.17          PLASTOCRETE® N LIQUID

Plastocrete-N is a concrete admixture in liquid form that acts both as a highly efficient plasticizer and waterproofing agent. Suitable for use in tropical and hot climatic conditions.

USE

Particularly water-retaining structures such as:

1.   Reservoirs and dams
2.   Sewage works
3.   Canals
4.   Culvert tunnels and, wherever waterproof concrete is required.

CHARACTERISTICS AND ADVANTAGES

Plastocrete-N provides the following properties:

1.   Improved workability without increased water content.
2.   Allows easier compaction leading to denser concrete and superior finish
3.   Increased strength and durability
4.   Reduced shrinkage
5.   Improved water tightness

3       Set Controlling Admixtures

Specific set retarders (Sika Retarder) allow to apply the concrete as along as recommended. Different types of accelerators (Sika Rapid) controlling the high early strength development as well as

3.1   SIKATARD® R

SikaTard R is a liquid admixture developed for the control of cement hydration.

SikaTard R retards/stabilizes sand/cement masonry mortars and concrete mixes.

USE

SikaTard R is mainly used for the following applications:

1.   A wide range of applications where set retarding/stabilizing is requested
2.   In conjunction with Sikanol 118 to provide masonry mortars for laying brick/blocks manufactured from absorbent materials such as clay, sand-line and concrete.

CHARACTERISTICS AND ADVANTAGES

SikaTard R retards/stabilizes the hydration of the cement.

1.   Strong retardation/stabilizing to enable brick/block laying to continue over long periods of time
2.   Delays the set of the mortar, however the retarding/stabilizing effect declines once in place as moisture evaporates and migrates due to the suction of the brick/block enabling setting and curing to occur as normal
3.   Provides higher ultimate strengths

3.2   SIKARAPID®-1

SikaRapid-1 is a new generation hardening accelerator for concrete and mortar. It increases the early strengths of concrete without negatively influencing final strengths.

Suitable for use in tropical and hot climatic conditions.

USE

SikaRapid-1 is used in ready mix concrete plants where extremely high requirements for early strengths of between 6-24 hours have to be met.

SikaRapid-1 does not contain any chlorides and can therefore be used without any reservations for reinforced as well as pre-stressed concrete. However, it should not be used in combination with expanding or shrinkage compensating admixtures.

CHARACTERISTICS AND ADVANTAGES

SikaRapid-1 is normally used in combination with a superplasticizer. The addition of SikaRapid-1 does not change the positive properties (e.g. fluidifying, stiffening behavior etc.) of the superplasticizer.

Depending on the dosage of SikaRapid-1, an increase in early strengths during the first 24 hours of up to 100 % in comparison with normal Sikament concrete can be achieved. Depending on the brand of OPC/HPC used and the temperature of the fresh concrete, the effect may vary slightly.

4       Concrete Essentials:

A wide range of add on complete the product range like mould release agents (Separol), curing compounds (Antisol), surface retarders (Rugasol), viscosity modifying agents (Sika Stabilizer) etc.

4.1   IGASOL®

Lgasol Emulsion BA is a brown-black rubberized bitumen liquid emulsion with excellent adhesion, which dries to a tough seamless, flexible waterproof and vapor-proof membrane for concrete structures. Suitable for tropical and hot climatic conditions.

USE

                      Tanking and waterproofing of substructures to provide an impervious membrane in wet areas.

1.   Floors to provide a sandwich membrane in new construction or surface treatment
2.   Vapour barrier of cladded walls.
3.   Maintenance of many roof types including asphalt felt roofs, lead, zinc aluminum, concrete, cement, lightweight screeds, timber etc.
4.   As an adhesive for bonding wood works and wooden mosaics, insulation boards, expanded polystyrene cork tiles and to provide a key for plastering.
5.   Damp proof membrane for roofs
6.   Floor slabs
7.   Basements , Retaining walls
8.   Landscape decks

CHARACTERISTICS AND ADVANTAGES

1.   Excellent adhesion to moist building substrates
2.   Resistant to chlorides, sulphates
3.   Efficient curing membrane to freshly laid concrete
4.   Single component
5.   Water based , non-toxic
6.   Economical , easy to apply, reduces labour costs
7.   Can be applied on vertical and horizontal surface.
8.   Impermeable to water
9.   Seamless, joint free
10.   Elastic to bridge structural hair-cracks
11.   Unaffected by high ambient temperature
12.   High resistance to aggressive soils and contaminated ground water
13.   Low odour, dries without generating strong vapours

4.2   RUGASOL®-2 W

Rugasol -2 Liquid is a water-based surface retarder for exposed aggregate concrete on wooden shuttering.

The product is suitable for use in tropical and hot climatic conditions.

USE

It is especially suitable for:

1.   Exposed aggregate concrete
2.   Treatment of fresh concrete surfaces in horizontal construction joints to avoid chipping. Concrete treated in this way provides an excellent key for construction joints, screeds and renderings
3.   Treatment of e.g. walkways, terrazzo, which should receive a visible, lasting exposed aggregate effect

CHARACTERISTICS AND ADVANTAGES

1.   Labour costs are reduced
2.   Consistent finish is produced making it suitable for inexpensive formwork
3.   Diluted to suit application
4.   Solvent free
5.   Non-hazardous

4.3   ANTISOL® E-20

Antisol-E 20 is a liquid, paraffin based curing compound for preventing water loss in concrete. This product is ready for use and simple to apply.

USE

Antisol-E 20 is mainly used for structural concrete surfaces where subsequent surface treatment will not be required.

CHARACTERISTICS AND ADVANTAGES

1.   Reduces incidence of plastic cracking
2.   Ensures achievement of desired strengths
3.   Minimises’ shrinkage
4.   Reduces dusting
5.   Eliminates the need for other costly methods of curing

4.4   ANTISOL®-90/90 A

Synthetic resin based, solvent containing concrete curing compound

USE

It is used mainly for structural concrete surfaces where subsequent surface treatment will not be required. Antisol 90 is sprayed onto newly laid concrete surface form a thin film barrier against premature water loss. Without disturbance to the normal setting action, the concrete is then allowed to cure and achieve max properties.

CHARACTERISTICS AND ADVANTAGES

1.   90% efficiency index
2.   Reduces and taxiways
3.   Easy to use and apply
4.   Ensures achievement of desired strengths
5.   Minimises’ shrinkage
6.   Reduces dusting

        Eliminates the need for other costly methods of curing

4.5   ANTISOL® E-15

Antisol-E 15 is a liquid, paraffin based curing compound for preventing water loss in concrete. The product is ready for use and simple to apply. The product is suitable for use in tropical and hot climatic conditions.

USE

Antisol-E 15 is particularly useful in large areas of exposed concrete, such as:

1.   Roof decks
2.   Retaining walls
3.   Pre-stressed beams and piers
4.   Irrigation canals / channels

CHARACTERISTICS AND ADVANTAGES

1.   Reduces incidence of plastic cracking
2.   Ensures achievement of desired strengths
3.   Minimizes shrinkage
4.   Reduces dusting
5.   Eliminates need for other costly methods of curing

4.6   ANTISOL®-WB

Antisol-WB is a liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. It is un-degradable compound, i.e. it is primer/sealer for another application.

Antisol-WB complies with ASTM C 309-81 type 1 class A.

USE

Antisol-WB is particularly useful in large areas of exposed concrete, such as:

1.   Highways
2.   Runways and taxiways.
3.   Aprons and hard standings.
4.   Roof decks.
5.   Pre-stressed beams and piers.
6.   Irrigation canals/channels.

CHARACTERISTICS AND ADVANTAGES

1.   Reduces incidence of plastic cracking.
2.   Ensure achievement of desired strengths.
3.   Minimize shrinkage.
4.   Reduces dusting.
5.   Increases frost resistance.
6.   Alleviates other costly methods such as
7.   Hessian - watering.
8.   Seals, prime & hardness of cement based composition.

4.7   ANTISOL®-E 10

Antisol-E 10 is a liquid, paraffin based curing compound for preventing water loss in concrete. The product is ready for use and simple to apply. The product is suitable for use in tropical and hot climatic conditions.

USE

Antisol-E 10 is particularly useful in large areas of exposed concrete, such as:

1.   Roof decks
2.   Retaining walls
3.   Pre-stressed beams and piers
4.   Irrigation canals / channels

CHARACTERISTICS AND ADVANTAGES

1.   Reduces incidence of plastic cracking
2.   Minimizes shrinkage
3.   Reduces dusting
4.   Eliminates need for other costly methods of curing

4.8   SEPAROL® FP-15

Separol FP 15 is an oil based shutter / mould release agent. When applied to steel formwork it provides for clean, fast and easy striking. The product is specifically developed for use in tropical and hot climatic conditions.

USE

Separol FP 15 can be used on:

1.   Steel shuttering
2.   Plywood shutters
3.   High density plastic shutters

CHARACTERISTICS AND ADVANTAGES

Separol FP 15 provides the following beneficial properties:

1.   Allows clean, easy striking
2.   Extends the life of formwork.
3.   Improved finish for fair faced concrete.
4.   Reduces concrete contamination.
5.   Economical to use
6.   Reduces blow hole formation

4.9   PURIGO®-5 S

Purigo-5 S is an economical, easy to use surface hardener and dustproofed for concrete floors. It is a liquid based on ‘activated’ sodium silicate which reacts chemically with calcium hydroxide in the concrete to bind up and tighten the top surface, producing a hard, dust free finish.

USE

Purigo-5 S is an efficient, economical product for use on concrete floors to prevent surface dusting from occurring. It will not however, make bad disintegrating concrete good.

CHARACTERISTICS AND ADVANTAGES

1.   Very quick and easy to apply
2.   Can be used on both new and old concrete
3.   Chemically reacts with concrete to become an integral part of the surface matrix.
4.   Purigo 5S is the economical answer to the problem of surface dusting.
5.   Will not prevent over coating when used to assist with curing of concrete
6.   Ideal for use as an aid to improve curing when traditional curing methods and membranes are impractical
7.   Helps concrete attain maximum hydration, strength, durability and surface hardness.

4.10          SIKA® MOULD BA

Sika Mould BA Concentrate 1:39 is a blend of refined mineral oils and anti-corrosive additives in concentrate form producing a thin-film release agent. When diluted and applied to steel, timber or plastic formwork allows for clean, fast and easy striking.

USE

1.   Steel shuttering
2.   Plywood shutters
3.   Plastic formwork

CHARACTERISTICS AND ADVANTAGES

1.   Good adhesion to Steel and timber formwork
2.   Reduces concrete contamination
3.   Does not promote rusting of the formwork
4.   Economical to use
5.   Reduces blow hole formation

5        Air Entrainers

Sika Aer Technology used where high resistance to freeze/thaw or better fresh concrete properties is required by introducing correctly sized and evenly distributed  Air pores into the concrete –

5.1   INTRACRETE® EH-V

A high performance powder admixture for grouting application for cable grouting and anchoring of bolts in concrete.

Suitable for tropical and hot climatic conditions

USE

The expansion system of Intracrete EH-V is based on nitrogen gas. Typical application fields are:

1.   Pre-stressed cable ducts
2.   Rock and soil anchoring
3.   Bearing plates
4.   Pre-placed aggregates
5.   Tunnel linings

CHARACTERISTICS AND ADVANTAGES

1.   Long retention of workability
2.   Improved fluidity
3.   Increased cohesion
4.   Volume expansion in the wet state

5.2   INTRAPLAST® Z

An expanding grout admixture in powder form. By introducing micro bubbles into the mix, it produces wet volume expansion and increased fluidity without segregation.

USE

Intraplast Z is used to increase cohesion in cement grouts and is suitable for use in the grouting of:

1.   Pre-stressed cable ducts.
2.   Rock and soil anchoring.
3.   Bearing plates.
4.   Pre-placed aggregates.
5.   Tunnel linings.
6.   Pre-cast concrete elements.
7.   Tilt construction wall panels.
8.   Crack injection.

CHARACTERISTICS AND ADVANTAGES

1.   Intraplast Z plasticizes the mix with water reduction of up to 20%, thus improving the strength of the grout.
2.   Gas generated during setting distributes bubbles causing expansion to take place (3%-8% by volume) thus compensating for normal shrinkage. The initial retarding effect of Intraplast Z improves grout penetration, reduces water separation and bleeding.
3.   The expansive forces generated completely fill voids.
4.   Nontoxic, non-chloride.

5.3   SIKANOL® 118

Sikanol 118 is a two component plasticizing and stabilizing system which delays the set of sand/cement and cement/lime/sand mortars for extended periods while improving workability, reducing bleed water and improving frost resistance.

USE

Sikanol 118 are used in conjunction to provide masonry mortars for laying bricks manufactured from absorbent materials such as clay, sand-lime and for concrete blocks.

CHARACTERISTICS AND ADVANTAGES

Sikanol 118 increases the plasticity of the mortar by the entrainment of controlled amounts of air.

Sikanol M/Sikanol 118 also improves cohesion and consistency.

6       Fiber Products:

Sika Fiber technology improves the tensile characters of the concrete and prevents the micro cracking due to plastic and drying shrinkage in cementitious systems –

6.1   SIKA® FIBRE-12

Sika Fibre-12 is a high quality, 100% virgin polypropylene fiber that reduces the occurrence of plastic shrinkage and plastic settlement cracking whilst enhancing the surface properties and durability of a cementitious matrix in hot climates. The Sika Fibre-12 is coated with a surfactant to improve initial dispersion and good bond with the cement paste.

USE

Sika Fibre-12 is used to prevent micro-cracking due to plastic and drying shrinkage in cementitious systems like

1.   Concrete of various types
2.   Cementitious overlays
3.   Patch repairs on pre-cast elements
4.   Industrial floor slabs
5.   Water retaining structures

CHARACTERISTICS AND ADVANTAGES

The main advantages are:

1.   Reduced plastic shrinkage cracks
2.   Alternate to using crack control reinforcing mesh
3.   Reduced water and chemical permeability
4.   Increased abrasion properties
5.   Better finishing
6.   Reduces future repair costs as a result of cracking
7.   Better resistance against thermal movement
8.   Better bonding

7       Special Purpose Concrete Admixtures:

Sika provides admixtures systems for underwater concrete, pumpabel concrete and concrete additives like Sika Silica Fume products –

7.1   SIKA®-CNI

Sika-CNI is a calcium nitrite-based admixture designed to inhibit the corrosion of steel in reinforced concrete.

USE

Fields of application:

1.   Concrete roads
2.   Bridges
3.   Tunnels
4.   Below ground rafts, beams and foundations
5.   Retaining walls
6.   Industrial plants
7.   Park decks in multi-story car parks etc.

CHARACTERISTICS AND ADVANTAGES

Sika-CNI is a corrosion-inhibiting admixture that provides protection against corrosion in reinforced concrete structures.

In the high alkalinity of concrete, reinforcing steel builds up a natural passivation layer. This layer protects the steel from corrosion. This passive ferric oxide layer however can be damaged by the presence of chlorides and combined with the presence of moisture and oxygen which will lead to corrosion of the steel. Sika-CNI will help oxidize the steel to form ferric oxide, which resists chloride attack. This reduces the areas of ferrous oxide ions that are susceptible to attack by chlorides. Ferrous oxide creates a ferrous oxide complex (rust), if attacked by chlorides. In the presence of these chlorides, rust continues to generate in these areas (corrosion pits) and ultimately leads to staining, cracking and spelling of the concrete. Sika-CNI fortifies the ferric oxide passivating layer prior to the penetration of chlorides. The nitrite ions in Sika-CNI will convert ferrous oxide to more resistant ferric oxide, thereby protecting the steel reinforcement from corroding

Sika-CNI extends the service life of reinforced concrete structures.

7.2   SIKATARD® R

SikaTard R is a liquid admixture developed for the control of cement hydration.

SikaTard R retards/stabilizes sand/cement masonry mortars and concrete mixes.

USE

SikaTard R is mainly used for the following applications:

1.  A wide range of applications where set retarding/stabilizing is requested
2.   In conjunction with Sikanol 118 to provide masonry mortars for laying brick/blocks manufactured from absorbent materials such as clay, sand-line and concrete.

CHARACTERISTICS AND ADVANTAGES

SikaTard R retards/stabilizes the hydration of the cement.

1.   Strong retardation/stabilizing to enable brick/block laying to continue over long periods of time
2.   Delays the set of the mortar, however the retarding/stabilizing effect declines once in place as moisture evaporates and migrates due to the suction of the brick/block enabling setting and curing to occur as normal
3.   Provides higher ultimate strengths

7.3   SIKA® FERROGARD®-901

Sika FerroGard-901 is a liquid concrete admixture based on Sika Ferro Gard Technology designed for use in reinforced concrete and mortar. It acts as a corrosion inhibitor for the steel reinforcement. By using Sika FerroGard-901, the life expectancy and durability of concrete will be substantially increased.

USE

Typical uses are in:

1.   Marine structures
2.   Concrete roads
3.   Bridges
4.   Tunnels
5.   Basement rafts, beams, piles and foundations
6.   Retaining walls, columns, slabs, beams
7.   Industrial plants
8.   Multi story car parks

CHARACTERISTICS AND ADVANTAGES

The following advantages can be achieved using Sika FerroGard-901:

1.   Corrosion protection for embedded reinforcing steel, especially from chloride attack
2.   Protection from the destructive influences of reinforcement corrosion
3.   No negative influences on the properties of both the fresh and the hardened concrete

7.4   SIKA-AER® (T) BH

Sika-Aer (T) is a ready to use highly concentrated, air entraining concrete admixture. Its efficiency is based upon the number of correctly sized and evenly distributed air pores imparted to the concrete. Suitable for use in tropical and hot climatic conditions.

USE

Sika-Aer (T) is used to produce easily workable and durable concrete for:

1.   Roads
2.   Runways and taxiways
3.   Aprons and hard standings
4.   Dams and reservoirs
5.   Mass concrete structures
6.   Cold rooms and freezers

CHARACTERISTICS AND ADVANTAGES

1.   Improved workability
2.   Increased frost resistance
3.   Resistant to deicing salts
4.   Improved durability
5.   Increased cohesion reducing the risk of segregation
6.   Reduced water content without loss of workability
7.   Unaffected setting time even when overdosed

7.5   SIKAPUMP®

Sika Pump is a universal concrete admixture which improves difficult concrete mixes and protects concrete pumps and pipes from excessive material wear. The product is suitable for use in tropical and hot climatic conditions.

USE

Sika Pump is recommended for use where concrete mixes with varying fines content, low cement content or, unsatisfactory aggregate grading with poor water retention lead to segregation during pumping and, result in extremely high pump pressures.

The use of Sika Pump facilitates that even secondary raw materials, such as aggregates derived from excavation or demolition work, may be utilized and concrete made with such aggregates, can be pumped without excessive energy demand.

CHARACTERISTICS AND ADVANTAGES

Sika Pump increases cohesion, plasticity as well as the “gliding“ ability of fresh concrete. Therefore, workability and above all the pumpability of difficult concrete mixes will be noticeably improved. Concrete pumping frequently interrupted by stoppages due to blocking of the pipes etc. can be avoided and the output increased.

Sika Pump helps to extend longevity of concrete pumps and pipes and reduce maintenance costs

7.6   SIKARAPID®-1

SikaRapid-1 is a new generation hardening accelerator for concrete and mortar. It increases the early strengths of concrete without negatively influencing final strengths.

Suitable for use in tropical and hot climatic conditions.

USE

SikaRapid-1 is used in ready mix concrete plants where extremely high requirements for early strengths of between 6-24 hours have to be met.

SikaRapid-1 does not contain any chlorides and can therefore be used without any reservations for reinforced as well as pre-stressed concrete. However, it should not be used in combination with expanding or shrinkage compensating admixtures.

CHARACTERISTICS AND ADVANTAGES

SikaRapid-1 is normally used in combination with a superplasticizer. The addition of SikaRapid-1 does not change the positive properties (e.g. fluidifying, stiffening behaviour etc.) of the superplasticizer.

Depending on the dosage of SikaRapid-1, an increase in early strengths during the first 24 hours of up to 100 % in comparison with normal Sikament concrete can be achieved. Depending on the brand of OPC/HPC used and the temperature of the fresh concrete, the effect may vary slightly.

It is sensible to combine SikaRapid-1 only with normal setting types of Sikament.

8       Ultra High Range Water Reducers:

High range water reducers and superplasticizers achieve significant water reduction required for the fluidity of fresh concrete. They increase compressive strength of concrete and maintain an excellent workability and flow ability. Ideal for the production of Self Consolidating Concrete (SCC) and other types of concrete –

8.1   SIKA® VISCOCRETE®-20 HE

Sika ViscoCrete-20 HE is a third generation superplasticizer for concrete and mortar. The product is suitable for tropical and hot climatic conditions.

USE

1.   Pre-cast concrete
2.   Fast track concrete
3.   In situ concrete requiring fast stripping time
4.   Self-Compacting Concrete (SCC)

CHARACTERISTICS AND ADVANTAGES

1.   Pronounced increase in the early strength development, resulting in very economic stripping times for pre-cast and in situ concrete
2.   Extremely powerful water reduction, resulting in high density, high strengths and reduced water permeability etc.
3.   Excellent plasticizing effect, resulting in improved flow ability placing and compacting behavior
4.   Reduced energy cost for steam cured pre-cast elements
5.   Especially suitable for the production of Self Compacting Concrete (SCC)
6.   Improved shrinkage and creep behavior
7.   Reduced closure times for repairs of roads and runways
8.   Sika ViscoCrete-20 HE does not contain chlorides or other ingredients which promote the corrosion of steel reinforcement. It is therefore suitable for reinforced and pre-stressed steel.

8.2   SIKA® VISCOCRETE®-3110

Sika ViscoCrete -3110 is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with exceptional flow retention properties.

USE

1.   High flow concrete
2.   Self-compacting concrete (S.C.C.)
3.   Concrete with very high water reduction (up to 30%)
4.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

1.   Excellent flow ability (resulting in highly reduced placing and compacting efforts)
2.   Strong self-compacting behavior
3.   Extremely high water reduction (resulting in high density and strengths)
4.   Increased high early strength development
5.   Improved shrinkage and creep behavior
6.   Reduced rate of carbonation of the concrete
7.   Improved finish

8.3   SIKA® VISCOCRETE®-4100

Sika ViscoCrete-4100 is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with exceptional slump retention.

Sika ViscoCrete-4100 is especially suitable for use in concrete mixes containing Micro silica and other pozzolanic materials like GGBS and Fly Ash.

USE

1.   High flow concrete
2.   Self-compacting concrete
3.   Concrete with high water reduction
4.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

1.   Strong self-compacting behavior
2.   Extremely high water reduction (resulting in high density and strengths)
3.   Increased high early strength development
4.   Improved shrinkage and creep behavior
5.   Reduced rate of carbonation of the concrete
6.   Improved finish

8.4   SIKA® VISCOCRETE-5030

It’s a third generation high performance dual action superplasticizer for concrete which can also produce self-compacting concrete.

USE

1.   Concrete with the highest possible water reduction (up to 30%)
2.   High performance concrete
3.   High fines concrete
4.   Hot weather concreting and concrete with a long transport time and/or extended workability.

CHARACTERISTICS AND ADVANTAGES

1.   Reduced creep and shrinkage
2.   Very good cost/performance ratio
3.   Reduced carbonation rate of the concrete
4.   Greatly improved water tightness

8.5   SIKA® VISCOCRETE® KBRC FLOW

Sika ViscoCrete-KBRC Flow is a third generation high performance dual action superplasticizer for concrete which can also produce self-compacting concrete. It is based on Sika’s own ViscoCrete technology. This product is suitable for tropical and hot climatic conditions.

USE

1.   the production of site mixed, ready-mix concrete in summer, or hot weather, for the production of concrete with extended transportation or placing times
2.   concrete requiring retained workability for extended periods
3.   concrete with extremely high water-reducing capacity
4.   self-compacting concrete especially for where highly congested reinforcing steel is encountered or for slim elements requiring a high standard of surface finish.
5.   high performance / high strength concrete

CHARACTERISTICS AND ADVANTAGES

1.   Pronounced self-compacting behavior, therefore suitable for the production of self-compacting concrete (S.C.C.)
2.   High impermeability and strengths due to extremely high water reduction
3.   Improved shrinkage and creep characteristics
4.   Excellent flow ability resulting in minimal placing and compacting efforts
5.   Slower rate of carbonation of the concrete
6.   Very Good cost / performance ratio

8.6   SIKA® VISCOCRETE®-3130

Sika ViscoCrete-3130 is a third generation super-plasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with exceptional flow retention properties.

USE

1.   High flow concrete
2.   Self-compacting concrete (S.C.C.)
3.   Concrete with very high water reduction (up to 30%)
4.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

1.   Excellent flow ability (resulting in highly reduced placing and compacting efforts)
2.   Strong self-compacting behavior
3.   Extremely high water reduction (resulting in high density and strengths)
4.   Increased high early strength development
5.   Improved shrinkage and creep behavior
6.   Reduced rate of carbonation of the concrete
7.   Improved finish

8.7   SIKA® VISCOCRETE®-5011

Sika ViscoCrete-5011 is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with good slump retention especially suitable for pre-cast concrete.

USE

1.   High flow concrete
2.   Self-compacting concrete
3.   Concrete with high water reduction
4.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

1.   Strong self-compacting behavior
2.   Extremely high water reduction (resulting in high density and strengths)
3.   Increased high early strength development
4.   Improved shrinkage and creep behavior
5.   Reduced rate of carbonation of the concrete
6.   Improved finish

8.8   SIKA® VISCOCRETE®-4100 P

Sika ViscoCrete-4100 P is a third generation superplasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with good slump retention for precast concrete. Sika ViscoCrete-4100 P is especially suitable for use in concrete mixes containing Micro silica and other pozzolanic materials like GGBS and Fly Ash.

USE

Sika ViscoCrete-4100 P is used for the following types of concrete:

1.   High flow concrete
2.   Self-compacting concrete
3.   Concrete with high water reduction
4.   High strength concrete

CHARACTERISTICS AND ADVANTAGES

Sika ViscoCrete-4100 P provides the following beneficial properties :

1.   Strong self-compacting behavior
2.   Extremely high water reduction (resulting in high density and strengths)
3.   Increased high early strength development
4.   Improved shrinkage and creep behavior
5.   Reduced rate of carbonation of the concrete
6.   Improved finish

REFERENCES:

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01101.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01102.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01104.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01105.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01106.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01107.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01108.html

http://pak.sika.com/en/solutions_products/02/02a001/02a001sa01/02a001sa01100/02a001sa01103.html